瓦楞纸箱厂家在生产过程中会遇到一个头痛的问题，就是针对纸箱机的崩坏和粘着问题，天津机械总结出来的解决办法是改善纸板材料，提高抗压强度和防潮性能，从而降低崩坏率。另外，有一点工厂需要提高粘接强度，增加淀粉糊的固体含量，通过减少胶水的用量来提高纸板的硬度来解决胶盒机的粘接问题。
Corrugated box manufacturers will encounter a headache in the production process, that is, in view of the problems of the collapse and adhesion of the carton machine, Tianjin Machinery summed up the solution is to improve the cardboard material, improve the compressive strength and moisture-proof performance, so as to reduce the collapse rate. In addition, some factories need to improve the bonding strength, increase the solid content of starch paste, and reduce the amount of glue to improve the hardness of cardboard to solve the bonding problem of glue box machine.
如何处理粘盒机粘不牢、盒崩坏的问题，在生产和使用中应注意以下几点:
How to deal with the problem that the box gluing machine is not firm and the box is broken should pay attention to the following points in production and use:
1、控制原纸的使用
1. Control the use of base paper
检查瓦楞纸的施胶量，原纸表面的吸水效果。如果原纸的表面施胶性差，吸水率就会偏高，就容易在低温、潮湿的冷藏环境下手摇，导致回湿、柔软，整理抗压强度降低。
Check the sizing amount of the corrugated paper and the water absorption effect of the base paper surface. If the surface sizing of the base paper is poor, the water absorption will be high, and it is easy to shake it by hand in the cold storage environment of low temperature and humidity, resulting in moisture regain, softness and reduction of finishing compressive strength.
2、纸板的生产要控制纸板的含水量
2. The production of paperboard should control the moisture content of paperboard
纸板含水量不能太多，因为含水量大纸板硬度低，影响纸板边压指数。在纸板加工过程中，单面机和双面机工序上的胶量不宜过大。一旦纸板上的胶量发生变形，而瓦楞纸板的形状则直接受到纸板边压的影响，边压降低，抗压强度也随之降低。
The water content of the paperboard cannot be too much, because the water content is large and the hardness of the paperboard is low, which affects the edge pressure index of the paperboard. In the process of paperboard processing, the glue quantity of single side machine and double side machine should not be too large. Once the amount of glue on the board is deformed, the shape of the corrugated board is directly affected by the side pressure of the board, which reduces the side pressure and the compressive strength.
3、纸板粘接强度要大
3. The bonding strength of paperboard should be large
粘合强度是瓦楞纸与衬纸的粘合强度。如果出现纸板假粘接、压平、不面纸或不面纸会与瓦楞纸板分开，那么其压平强度就会直线下降。
Bond strength is the bond strength between corrugated paper and liner paper. If there is false bonding, flattening, matte paper or matte paper will be separated from the corrugated board, then its flattening strength will drop in a straight line.
4. 控制间隙压力在生产过程中应适度
4. The gap pressure should be controlled appropriately in the production process
特别注意糊盒机的糊料间隙压力不能过小，双面机、模切机、太阳轮的间隙压力要控制在合理的范围内，以避免瓦楞纸板破碎，影响纸板的抗压强度。
Special attention shall be paid to the paste gap pressure of the pasting machine, which shall not be too small. The gap pressure of the double-sided machine, the die-cutting machine and the sun wheel shall be controlled within a reasonable range, so as to prevent the corrugated board from being broken and affecting the compressive strength of the board.
5. 使用防溅剂和防水清漆，解决表面防水防潮问题。
5. Use splash proof agent and waterproof varnish to solve the problem of surface waterproof and moisture-proof.
以上是
瓦楞纸箱厂家小编为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.gtmfpack.com
The above is the relevant content introduced by the manufacturer of corrugated box. If you want to know more, please visit the website: http://www.gtmfpack.com
