一、生产设备
1、 Production equipment
注塑托盘：采用大型注塑机一次注塑成型，产品结实耐用。实芯体，注塑模具可预留钢管孔，可内置钢筋增加承载；
Injection tray: large injection molding machine is used for one-time injection molding, the product is strong and durable. Solid core, injection mold can reserve steel pipe hole, can be built-in reinforcement to increase the bearing capacity;
吹塑托盘：采用吹塑机中空吹塑成型，整体一次吹塑成型，节省存储空间和运输成本。空芯体，不可内置钢筋。
Blow molding tray: blow molding machine hollow blow molding, the whole blow molding, save storage space and transportation costs. Hollow core, no internal reinforcement.
二、工艺不同
2、 The process is different
注塑托盘：注塑是注+压，注塑做的一定有浇口断面。
Injection tray: injection is injection + pressure, injection must have gate section.
吹塑托盘：也称为中空吹塑.吹塑是注+吹。吹塑做的一定有那个拔吹气管留下的头。
Blow molding tray: also known as hollow blow molding. Blow molding is injection + blow. Blow molding must have the head left by pulling out the air pipe.
三、表面结构
3、 Surface structure
注塑托盘为网格状或者平板状，有加强筋结构。
The injection tray is grid or flat, and has a stiffener structure.
吹塑托盘都为平板状，内部有支柱结构。
Blow molding pallets are flat, with pillar structure inside.
四、外观不同
4、 The appearance is different
注塑托盘：注塑托盘是实芯体，托盘表面是光亮的。因为有注塑口，所以成型后的产品会多出一小块不要的部分，有道工序会把它剪掉，虽然不明显，如果仔细观察还是能看见的。
Injection tray: injection tray is solid core, the surface of the tray is bright. Because there is an injection port, there will be a small part of the molded product that is not needed. A process will cut it off. Although it is not obvious, it can still be seen if you carefully observe it.
吹塑托盘：吹塑托盘外观表面会有吹塑孔，中间全部空置，只能生产双面托盘，不能生产单面托盘，而且产品进叉使用方向一般是两向进叉使用。
Blow molding tray: there will be blow molding holes on the surface of the blow molding tray, and all of them are empty in the middle. It can only produce double-sided tray, but not single-sided tray, and the direction of product fork is generally two-way fork.
五、使用环境
5、 Use environment
一般而言吹塑托盘主要在环境恶劣、高强度作业的情况下使用。
Generally speaking, blow molding tray is mainly used in harsh environment and high intensity operation.
而注塑托盘则可以在:平库、立体库、冷库等环境和行业中使用。
The injection tray can be used in flat storage, stereo storage, cold storage and other environments and industries.
六、行业分布
6、 Industry distribution
注塑托盘使用范围广，在食品饮料、化工医药、烟草纺织，电子汽车、物流等多个行业中使用。自身重量轻，用料省，便宜，受到大家的喜爱。
Injection tray is widely used in food and beverage, chemical medicine, tobacco, textile, electronic automobile, logistics and other industries. It's light weight, material saving and cheap, so it's popular.
吹塑托盘适合恶劣环境，抗冲击性要求较高的环境。耐低温性好。适合对托盘的承重要求较高，满足重型货物搬运需求。例如重工业，食品冷冻行业等等。
Blow molding tray is suitable for harsh environment with high impact resistance. Good low temperature resistance. Suitable for high load-bearing requirements of pallets, to meet the needs of heavy cargo handling. For example, heavy industry, food freezing industry and so on.
七、优缺点
7、 Advantages and disadvantages
注塑托盘可内置钢筋，可以上货架使用，注塑成型精度高。缺点是注塑托盘对料要求高，注塑回收料产品质量比全新料差太多。
Injection tray can be built-in reinforcement, can be used on the shelf, high injection molding precision. The disadvantage is that the injection tray has high requirements for materials, and the quality of recycled materials is much worse than that of new materials.
