蔬菜包装纸箱在我们的生活中随处可见，但你知道它也需要以正确的方式包装吗?正确的蔬菜包装盒不仅可以保护产品，而且可以很好的利用空间。以下是
蔬菜包装厂家的包装方法及印刷前的准备工作:
Vegetable packing box can be seen everywhere in our life, but do you know that it also needs to be packed in the right way? The right vegetable packing box can not only protect products, but also make good use of space. The following is the packaging method and preparation before printing of the vegetable packaging manufacturer:
一般不同的企业都会根据产品的大小、特点定制纸箱，采用合适的纸箱包装。但有时纸箱与需要包装的产品不相适应，会产生较大的空隙，这时需要采取相应的解决办法。如果缝隙没有造成产品位置的重大变化，可以填充几箱。蔬菜包装盒厂家告诉你，如果纸箱内的气孔较大，产品在运输过程中容易发生震动和碰撞，需要用泡沫板固定。
Generally, different enterprises will customize the cartons according to the size and characteristics of the products, and use appropriate cartons for packaging. But sometimes the cartons are not suitable for the products that need to be packed, and there will be a large gap. At this time, corresponding solutions need to be taken. If the gap does not cause a significant change in product position, several boxes can be filled. The vegetable box manufacturer tells you that if the pores in the cartons are large, the products will easily vibrate and collide during transportation, so foam board must be used.
除了在加工前准备原纸和印刷设备外，还应在印刷前准备好蔬菜包装盒，并做好技术准备，以保证印刷效果。以下是蔬菜包装箱厂家介绍的纸箱印刷的技术准备工作。请注意。
In addition to the preparation of base paper and printing equipment before processing, vegetable packing boxes should be prepared before printing, and technical preparations should be made to ensure the printing effect. The following is the technical preparation work of the carton printing introduced by the vegetable packing box manufacturer. Please note that.
1.彩色原稿经电子分色处理成单色，然后制作成胶片。
1. The color originals are processed into monochrome by electronic color separation and then made into film.
2.用紫外线照射在印版的背面进行曝光，形成印版底座。
2. Use ultraviolet light to expose the back of the plate to form the plate base.
3.取下印版正面的保护膜，放上负片，盖上真空膜，真空抽吸后，用紫外线作主要曝光，负片将转移到印版上。
3. Take off the protective film on the front of the plate, put on the negative film, cover the vacuum film, after vacuum suction, use ultraviolet as the main exposure, the negative film will be transferred to the plate.
4.蔬菜包装厂家告诉您，晒干后，用紫外线光源照射粘合剂，然后通过曝光来调节硬度。
4. The vegetable packaging manufacturer tells you that after drying, the adhesive is irradiated with ultraviolet light source, and then the hardness is adjusted by exposure.
以上是蔬菜包装厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.gtmfpack.com
The above is the relevant content introduced by the vegetable packaging manufacturers. To learn more, please visit the website: http://www.gtmfpack.com
