1、木箱包装箱体表面不允许有任何损坏和污迹，无锈斑、剥层、龟裂和其它纸材缺陷，箱体里纸面纸不允许有拼接、缺材、露楞、折皱、透胶、色差等感官缺陷，同一批产品面纸白度、纸材必须一致，预印和胶印UV包装箱面纸上UV层允许有轻微裂痕，不允许有掉渣现象。
1. No damage, stain, rust, peeling, cracking and other paper defects are allowed on the surface of wooden packing box. The paper surface in the box is not allowed to have sensory defects such as splicing, lack of material, exposed ridge, wrinkle, glue penetration and color difference. The whiteness and paper materials of the same batch of products must be consistent. The UV layer on the preprint and offset UV packing box surface paper is allowed to have slight cracks and no residue Phenomenon.
2、包装箱箱体印刷图案，文字清晰正确，深浅一致，放置准确（套印误差范围为±1mm）,印刷墨迹不允许出现掉墨现象，无错字、错印、漏印、重印多余的印刷图案及字迹，每箱1mm×1mm大小之内漏白现象不得多于5处，如有多余印刷墨迹现象，在箱体正面每箱1mm×1mm大小之内不得多于5处，在箱体侧面每箱2mm×2mm大小之内不得多于5处，条码必须可识别。
2. The printing pattern of the packing box is clear and correct, the depth is consistent, and the placement is accurate (the overprint error range is ± 1 mm), Ink drop is not allowed in printing ink. There are no wrong words, wrong printing, missing printing, and reprint of redundant printing patterns and handwriting. There shall be no more than 5 white spots within the size of 1 mm × 1 mm in each box. If there is redundant printing ink, there shall be no more than 5 white spots within the size of 1 mm × 1 mm in each box on the front of the box and no more than 5 white spots within the size of 2 mm × 2 mm in each box on the side of the box. The barcode must be recognizable.
3、木箱包装的制作要求应符合标准，GB/T 12464 普通木箱包装标准规定，木材的含水率一般不大于20%，但外箱档与B型箱的木材的含水率可在24%以下，木构件的宽度与厚度尺寸不大于20 mm时，其偏差为-1 mm～+2 mm;大于20 mm时，其偏差为±2 mm。
3. The production requirements of wooden box packaging should comply with the national standard, GB / T 12464 standard for ordinary wooden box packaging, the moisture content of wood is generally not more than 20%, but the moisture content of outer box and b-box can be less than 24%, when the width and thickness of wood members are not more than 20 mm, the deviation is - 1 mm to + 2 mm; when it is more than 20 mm, the deviation is ± 2 mm.
4、木箱包装箱体压痕线宽度不得大于12mm，折线居中，不得有裂破、断线、重线等多余的压痕线及影响感官折迹缺陷。
4. The width of the indentation line of the wooden packing box shall not be greater than 12mm, the folding line shall be in the middle, and there shall be no cracks, broken lines, heavy lines and other redundant indentation lines and defects affecting the sensory.
5、木箱包装箱体粘合剂为玉米淀粉胶，胶液应涂布均匀，充分，无溢出。粘合必须整齐、牢固、两片接头对齐，上下左右错位不得大于2mm，无箱体与箱体互贴等现象。
5. The adhesive for wooden packing box is corn starch glue. The glue liquid should be coated evenly and fully without overflow. The bonding must be neat and firm, the two pieces of joints must be aligned, and the dislocation of the top, bottom, left and right must not be greater than 2mm, and there is no such phenomenon as the box and the box sticking to each other.
This article is provided by heavy duty carton manufacturers. Our website is: http://www.gtmfpack.com We will serve you wholeheartedly and warmly. Welcome to visit!
