瓦楞纸箱厂家要保证纸箱的质量，对于生产纸板的平整度一定要控制好，因为这对纸箱的整体效果和承载能力有很大的影响。那么影响瓦楞纸箱平整度的因素是什么呢?
Corrugated box manufacturers should ensure the quality of the box, and the flatness of the production board must be well controlled, because it has a great impact on the overall effect and bearing capacity of the box. So what are the factors that affect the flatness of corrugated boxes?
有一些要求瓦楞纸箱的生产材料和机械设备,因为生产的瓦楞纸箱纸定量差异,和纸张水分含量是不同的,本文通过加热器的角,受热面长度选择和调节不当或角,受热面长度不能任意调节。前者由于操作不当，后者由于设备的限制，影响了预热干燥效果，导致纸箱平整度出现问题。还有就是不能正确应用蒸汽喷涂安装或设备没有喷涂安装，所以不能随意增加纸张湿度。纸张预热后分布水分时间不足或环境湿度大，通风不良，消耗线速度不当。单一瓦楞纸机、上胶机数量不适当、不均匀和不均匀膨胀纸板的介绍。蒸汽压力不足或不稳定，疏水阀等附件损坏，或管道排水不畅，导致预热器不能正常波动。
There are some requirements for corrugated box production materials and mechanical equipment, because the quantitative difference of corrugated box paper produced is different from the moisture content of paper. In this paper, through the angle of heater, the length of heating surface is not selected and adjusted properly or the angle, the length of heating surface cannot be adjusted arbitrarily. Due to the improper operation of the former and the limitation of the latter, the preheating and drying effect is affected, which leads to the problem of the evenness of the cartons. There is also the incorrect application of steam spray installation or equipment is not spray installation, so can not increase the paper humidity at will. After paper preheating, the distribution time of moisture is insufficient or the environmental humidity is large, the ventilation is poor, and the consumption line speed is improper. The introduction of a single corrugating machine, glue machine with inappropriate number, uneven and uneven expansion board. The steam pressure is insufficient or unstable, the accessories such as drain valve are damaged, or the pipeline drainage is not smooth, which causes the preheater not to fluctuate normally.
平整度也是能否生产出好的瓦楞纸箱的标准，在生产瓦楞纸箱时必须严格要求工作步骤。以上是瓦楞纸箱厂家为大家介绍的相关内容，想要了解更多内容，欢迎访问网站：http://www.gtmfpack.comFlatness is also the standard of producing good corrugated box. The working steps must be strictly required in the production of corrugated box. The above is the relevant content introduced by the corrugated box manufacturer for you. To learn more, please visit the website: http://www.gtmfpack.com
